Frequency: 50 Hz
Model: ACSSF46/04
SKU: ACSONS-PUMP-ACSSF46-04-4IN-10HP-3DIS
Flow: 46 m³/h (Rated capacity)
Head: 10 Meter – 30 Meter (Varies by stage/load configuration)
Specifications
Pump Type: Extra-High-Volume Submersible Borehole Pump (High-Flow 4-inch assembly)
Inlet / Outlet Size: 3 Inch Discharge
Well Diameter Compatibility: 4 Inch (Note: Ensure borehole clearance for high-flow intake)
Power Output: 10 HP / 7.5 kW
Operating Voltage: 380-415 V (3-Phase)
Motor Speed: 2900 RPM
Material Construction: Industrial-grade stainless steel pump housing and heavy-duty motor casing, featuring high-capacity, wear-resistant impellers designed for massive water throughput.
Insulation Standard: Class F
Ingress Protection: IP 68 (Submersible)
Maximum Fluid Temperature: 35°C
Quality Certifications: ISO 9001 Certified
Key Applications
Massive-Scale Agricultural Irrigation: Optimized for flood irrigation, canal filling, and rapid-response watering for large acreage where maximum volume (46 m³/h) is the primary requirement.
Industrial Drainage & Dewatering: Excellent for rapid removal of standing water from large excavation sites, construction pits, or industrial holding areas.
Large-Scale Reservoir Management: Engineered for the fastest possible transfer of water between large storage assets, industrial cooling basins, and municipal reservoirs.
Public Utility Water Intake: Suitable for high-volume primary water extraction for large communal or public infrastructure projects requiring massive flow capacity.
Installation and Use Notes
Piping: Use 3-inch, high-pressure industrial-grade HDPE or GI column piping. With a 46 m³/h output, it is imperative to use the full 3-inch discharge capacity to avoid extreme friction loss and potential back-pressure damage.
Electrical Protection: A professional 3-phase control panel with a Star-Delta or Soft Starter is mandatory. A 10 HP high-flow motor requires stable, controlled startup to prevent electrical surges and mechanical stress on the impeller shaft.
System Monitoring: Installation of dry-run protection sensors is strictly necessary. Given the massive displacement rate of 46 m³/h, even a few seconds of dry operation will cause catastrophic failure of the pump’s internal stages.
Installation Requirements: Use a high-strength, certified safety rope. Ensure the intake area is kept clear of loose sediment or debris, as this high-volume pump can easily create a vortex effect if not installed correctly in the well column.