Frequency: 50 Hz
Model: SAP2/48
SKU: ACSONS-PUMP-SAP2-48-4IN-3HP-1.25DIS
Flow: 2 m³/h (Rated capacity)
Head: Varies based on stage/load configuration (Engineered for high-head, low-volume performance in 4-inch deep wells)
Specifications
Pump Type: Multi-Stage Submersible Turbine Pump (4-inch assembly)
Inlet / Outlet Size: 1 1/4 Inch Discharge
Well Diameter Compatibility: 4 Inch
Power Output: 3 HP / 2.2 kW
Operating Voltage: 220-240 V (Single Phase) or 380-415 V (3-Phase)
Motor Speed: 2900 RPM
Material Construction: Corrosion-resistant components, featuring a durable cast iron or stainless steel casing and high-efficiency alloy impellers. Designed for stable, continuous-duty performance in demanding domestic and light-industrial deep-well settings.
Insulation Standard: Class F
Ingress Protection: IP 68 (Submersible)
Maximum Fluid Temperature: 35°C
Quality Certifications: ISO 9001 Certified
Key Applications
Residential Deep-Well Water Systems: Ideal for high-head extraction where water must be pumped from significant depths to supply villas, multi-story homes, or private estates.
Specialized Agricultural Irrigation: Suitable for localized, high-pressure drip or micro-sprinkler irrigation systems where precise flow is required for crops or greenhouses.
Pressure Boosting: Excellent for maintaining stable water pressure in residential complexes or commercial buildings with deep groundwater access.
Small Commercial Utility: Reliable for businesses requiring a steady, high-pressure water supply from deep-well sources.
Installation and Use Notes
Piping: Use high-quality 1 1/4-inch diameter, high-pressure rated column piping. Because this 3 HP unit is designed for higher head, piping must be capable of withstanding significant shut-off pressure.
Electrical Protection: For the 3 HP motor, a professional-grade control panel with a thermal overload relay and dry-run protection is mandatory. If using a single-phase model, ensure the control box is specifically rated for 3 HP startup current.
Backflow Prevention: A high-quality brass or stainless steel non-return valve (check valve) should be installed immediately above the pump discharge to prevent water hammer and protect the impellers from backflow damage.
Installation Requirements: Utilize high-tensile strength safety rope for deployment. All submersible electrical splices must be performed using a certified, professional-grade, resin-filled or heat-shrinkable jointing kit to ensure long-term, moisture-proof integrity.