top of page

Frequency: 50 Hz

Model: SAP3/25

SKU: ACSONS-PUMP-SAP3-25-4IN-2HP-1-25DIS

Flow: 3 m³/h (Rated capacity)

Head: 60 Meter – 160 Meter (Varies by stage/load configuration)


Specifications

  • Pump Type: Multi-Stage Submersible Borehole Pump (4-inch assembly)

  • Inlet / Outlet Size: 1-1/4 Inch Discharge

  • Well Diameter Compatibility: 4 Inch

  • Power Output: 2 HP / 1.5 kW

  • Operating Voltage: 220-240 V (Single-Phase) or 380-415 V (3-Phase) [Verify motor configuration based on your specific inventory]

  • Motor Speed: 2900 RPM

  • Material Construction: Corrosion-resistant stainless steel outer shell with precision-engineered thermoplastic/alloy impellers and diffusers, optimized for long-term reliability in deep-well environments.

  • Insulation Standard: Class F

  • Ingress Protection: IP 68 (Submersible)

  • Maximum Fluid Temperature: 35°C

  • Quality Certifications: ISO 9001 Certified


Key Applications

  • Deep-Well Residential Supply: Excellent for high-lift requirements in private homes, farmhouses, and villas where the water table is at a significant depth.

  • High-Pressure Irrigation: Ideal for residential gardens, small orchards, or commercial nurseries that require high vertical lift to maintain nozzle pressure.

  • Borehole-to-Tank Transfer: Reliable for moving water from deep boreholes to elevated storage tanks for domestic use.

  • Small-Scale Agricultural Systems: Suitable for filling water troughs or irrigation reservoirs where consistent, low-flow/high-head performance is required.


Installation and Use Notes

  • Piping: Use 1-1/4 inch high-pressure rated HDPE or GI column piping. Given this model's high-head capability, ensure all connections are properly sealed to prevent pressure loss.

  • Electrical Protection: A dedicated control panel with thermal overload protection and a start/run capacitor (for single-phase) is essential. This protects the 2 HP motor from voltage instability and startup stress.

  • System Monitoring: Installation of a dry-run protection system (such as level probes or a flow-based controller) is highly recommended to protect the pump from motor burnout due to water depletion.

  • Installation Requirements: Always use a high-strength nylon or stainless steel safety cable. The pump must be suspended by the cable, never by the power cable or the delivery pipe, to prevent mechanical damage.

Acsons Submersible Pump SAP3/25 4" 2hp 1.1/4"

الكمية

    اتصال
    نحن


    +971506793107
    طريق الذيد واشا
    مقابل مركز الذيد للصحة العامة
    الذيد، الشارقة، الإمارات العربية المتحدة

    يزور
    نحن

    من الإثنين إلى الأحد، من الساعة 7:30 صباحاً إلى الساعة 8:30 مساءً

    الجمعة 7:30 - 10:00 صباحاً

    يخبر
    نحن

    Thanks for submitting!

    bottom of page