Frequency: 50 Hz

Model: VP30A/06

SKU: ACSONS-PUMP-VP30A-06-4IN-7.5HP-3DIS

Flow: 30 m³/h (Rated capacity)

Head: 15 Meter – 45 Meter (Varies by stage/load configuration)

Specifications

• Pump Type: High-Flow Multi-Stage Submersible Centrifugal Pump

• Inlet / Outlet Size: 3 Inch Discharge

• Well Diameter Compatibility: 4 Inch Pump / 4 Inch Motor Compatible

• Power Output: 7.5 HP / 5.5 kW

• Operating Voltage: 380-415 V (3-Phase)

• Motor Speed: 2900 RPM

• Material Construction: High-grade Stainless Steel / Corrosion-resistant cast components (Optimized for durability in high-flow applications)

• Insulation Standard: Class F

• Ingress Protection: IP 68 (Submersible)

• Maximum Fluid Temperature: 35°C

• Quality Certifications: ISO 9001 Certified Factory, CE Compliant

  
  

Application

• High-Volume Irrigation: Engineered for rapid water movement in agricultural sprinkler systems or large-area flood irrigation.

• Commercial Water Transfer: Ideal for transferring high volumes of water between storage reservoirs, tanks, and large-scale industrial cisterns.

• Drainage & Dewatering: Suitable for construction sites or landscape areas requiring constant, high-capacity water removal.

• Industrial Cooling Supply: Reliable for systems that require a consistent, high-volume flow of water for cooling or processing.

• Community Water Systems: Effective for local water distribution networks where high-flow at moderate head is required.

  
  

Installation and Use The VP30A/06 is a high-flow specialized pump designed to move large quantities of water efficiently. The "3-inch" discharge is a key feature, allowing for reduced hydraulic resistance and maximizing the output capacity of the 7.5HP motor. When installing this unit, ensure that the borehole or water source can sustain the high withdrawal rate of 30 m³/h to prevent the pump from "pulling air." A professional 3-phase control panel is mandatory; it must be fitted with precise thermal overload protection and a reliable dry-run sensor (preferably sub-surface probes) to safeguard against cavitation or motor overheating. Due to the high flow rate, use pressure-rated 3-inch piping to avoid flow restriction. Ensure all electrical splices are finished with high-quality, waterproof resin or heat-shrink kits, as moisture ingress is the primary cause of downtime for high-flow submersible units.