Frequency: 50 Hz (Standard)

Model: HSC32-160/22

SKU: MBEE-PM-3HP-HSC32-160/22

Flow: Approximately 100 – 200 L/min

Head: Approximately 15 – 30 Meters

Specifications:-

• Pump Type: Peripheral / Centrifugal Pressure Booster Pump

• Inlet / Outlet Size: Likely 1.5 x 1.5 Inches or 2 x 2 Inches (Check physical nameplate)

• Power Output: 3 HP / 2.2 kW

• Operating Voltage: 415V ±10% (Three-Phase / 3Ph)

• Rated Current: Check nameplate (Est. 5–7 A at 415V)

• Motor Speed: 2850 – 2900 RPM (Approx. Induction Motor)

• Insulation Standard: Class F (High thermal resistance)

• Ingress Protection: IP 54 / IP 55 (Splash-proof and dust-protected)

• Maximum Fluid Temperature: 40°C – 60°C

• Mounting: Horizontal / Baseplate mounted

Application:

• Water pressure boosting for residential buildings and small complexes

• Small to medium-scale agricultural irrigation

• Industrial water circulation and transfer

• Commercial water supply systems

  
  

Installation and Use:This 3 HP unit requires a rigid foundation to handle operational vibration. The pump must be installed in a dry, well-ventilated area. It is likely non-self-priming, so the casing must be filled with water (primed) before startup. Never run the pump dry, as this will damage the mechanical seal. Use a direct-on-line (DOL) starter with appropriate overload protection.