Frequency: 50 Hz
Model: TP-100 (Compatible Frame – Standard)
SKU: MBEE-MTR-1HP-JET
Flow: 25 L/min – 60 L/min (or 1.5 – 3.6 m³/h)
Head: 20 Meter – 45 Meter
Specifications:-
Pump Type: Peripheral / Regenerative Turbine Pump (Self-Priming Jet Type / "Espa Style")
Inlet / Outlet Size: 1 x 1 Inch (or 1.5" x 1" depending on variant)
Power Output: 1 HP / 0.75 kW
Operating Voltage: 220V - 240V (Single-Phase / 1Ph) or 415V (3Ph) upon request
Rated Current: Approx. 5.0 – 6.5 A
Motor Speed: 2850 RPM (High-Efficiency Induction Motor)
Capacitor Configuration: 16 µF or 20 µF - 450 VL
Insulation Standard: Class F (High thermal resistance)
Ingress Protection: IP X4 (Splash-proof)
Maximum Fluid Temperature: 40°C – 60°C
Maximum Suction Lift: Approx. 8 Meters (Priming required before start)
Application:
Domestic water pressure boosting (overhead tanks, inline systems)
Small garden irrigation and sprinkler systems
Residential water supply from shallow wells or tanks
Small industrial equipment cooling circulation
Installation and Use:This Mbee pressure motor replicates the footprint of standard "Espa" type peripheral pumps, making it suitable as a drop-in replacement for existing installations. These pumps are designed for clean water free from abrasives or solids. Key usage notes: The pump is self-priming but requires an initial fill of water in the pump body before the first start. It must be installed in a dry, protected area (not submerged) with adequate ventilation. Ensure the suction pipe is completely airtight to maintain prime. Do not run the pump dry for more than 1-2 minutes, as it will damage the mechanical seal and impeller. For automatic operation, pair it with a pressure tank and pressure switch.
