Frequency: 50 Hz

Model: AP14A/25

SKU: ACSONS-PUMP-AP14A-25-4IN-10HP-2LB

Flow: 14 m³/h (Rated capacity)

Head: 60 Meter – 150 Meter (Varies by stage/load configuration)

Specifications

• Pump Type: Multi-Stage Submersible Centrifugal Pump

• Inlet / Outlet Size: 2 Inch Discharge

• Well Diameter Compatibility: 4 Inch Pump / 4 Inch Motor Compatible (LB - Large Bore configuration)

• Power Output: 10 HP / 7.5 kW

• Operating Voltage: 380-415 V (3-Phase)

• Motor Speed: 2900 RPM

• Material Construction: High-grade Stainless Steel and wear-resistant polymer components (Designed for reliability and durability)

• Insulation Standard: Class F

• Ingress Protection: IP 68 (Submersible)

• Maximum Fluid Temperature: 35°C

• Quality Certifications: ISO 9001 Certified Factory, CE Compliant

Application

• High-Volume Groundwater Extraction: Engineered for substantial water yield in agricultural and commercial applications.

• Agricultural Irrigation: Ideal for sprinkler and drip irrigation systems requiring consistent, moderate-to-high pressure flow.

• Commercial Water Supply: Suitable for building complexes and small industrial setups requiring reliable water distribution.

• Deep-Well Groundwater Management: Optimized for stable performance in 4-inch diameter boreholes.

• Pressure Boosting: Effective for industrial water pressure maintenance where consistent flow is required.

Installation and Use The AP14A/25 is a 25-stage, high-performance pump engineered to balance flow volume with vertical lift efficiency. The "2-inch LB" (Large Bore) discharge configuration is optimized to reduce friction losses, ensuring that the 10HP motor delivers maximum hydraulic output. When installing this unit, ensure the borehole is cleared of debris to prevent impeller damage. A professional-grade 3-phase control panel is mandatory; it should be equipped with thermal overload, dry-run protection, and phase-failure detection to prevent motor damage. Always verify that the column pipe is rated for the maximum pressure of the pump at your installation depth. Before finalizing the deployment, ensure all electrical cable joints are sealed with professional-grade, waterproof heat-shrink kits to guarantee electrical integrity and prevent moisture ingress at the motor leads.