Frequency: 50 Hz
Model: SAP2/23
SKU: ACSONS-PUMP-SAP2-23-4IN-1.5HP-1.25DIS
Flow: 2 m³/h (Rated capacity)
Head: Varies based on stage/load configuration (engineered for high-head, low-volume deep-well performance)
Specifications
Pump Type: Multi-Stage Submersible Turbine Pump (4-inch assembly)
Inlet / Outlet Size: 1 1/4 Inch Discharge
Well Diameter Compatibility: 4 Inch
Power Output: 1.5 HP / 1.1 kW
Operating Voltage: 220-240 V (Single Phase) or 380-415 V (3-Phase) - Verify specific motor variant.
Motor Speed: 2900 RPM
Material Construction: Corrosion-resistant stainless steel/cast iron components with wear-resistant hydraulic impellers, designed for domestic and small-scale irrigation.
Insulation Standard: Class F
Ingress Protection: IP 68 (Submersible)
Maximum Fluid Temperature: 35°C
Quality Certifications: ISO 9001 Certified
Key Applications
Domestic Water Supply: Ideal for deep-well extraction to supply private residences, villas, and small housing units.
Garden and Lawn Irrigation: Perfect for small-to-medium scale garden irrigation systems, providing consistent pressure for sprinkler heads and drip lines.
Small-Scale Agricultural Use: Suitable for small plots or greenhouses where low-volume, continuous water supply is required.
Pressure Boosting: Effective in small water distribution networks where modest flow at high head is necessary for reliable tap pressure.
Installation and Use Notes
Piping: Use 1 1/4-inch diameter piping. Ensure the piping is rated for the pump's shut-off pressure to prevent burst pipes at the wellhead.
Electrical Protection: A standard control box (for single-phase models) with a built-in capacitor and thermal overload switch is required. For 3-phase models, a dedicated starter panel with thermal overload protection is essential.
System Monitoring: It is recommended to install a non-return valve (check valve) just above the discharge to prevent backflow and "water hammer" effects, which can damage the pump impeller over time.
Installation Requirements: Use a high-quality safety rope to secure the pump in the well. Ensure all cable connections are made using a professional-grade waterproof heat-shrink or resin-filled kit to prevent electrical shorts.